Peak 60W AC-DC supply has 0.5W standby
Peak Electronics has added a 60W unit to its AC-DC power supply range. The PPM60 module can be selected to deliver an output voltage of 5V, 9V, 12V, 15V, 24V and 48Vdc. Dependent on the output voltage,...
View ArticleXP 60W AC-DC supply is convection cooled
XP Power’s ECP60 series of 60W AC-DC power supplies typically have 88% efficiency. The 101.6 x 50.8 x 30.4 mm footprint is industry standard. The no-load power consumption is specified at less than...
View ArticleLinear has triple-supply power controller 2.5-36V
Linear Technology has introduced a triple-supply prioritised controller for 2.5V to 36V systems. The controller selects the highest priority valid supply among three inputs to power the load. Priority...
View ArticleHiTek Power 10kW supplies for high voltages
HiTek Power has added to its range of 10kW high voltage power supplies with new input voltages. The standard input voltage of the series OLS10K (single output configuration) and series OLS10KD (dual...
View ArticleCUI 5-25W ac-dc supplies are encapsulated
Altera details 0.35µm CPLD Richard Wilson Altera continues to up the technology specifications in the complex programmable logic (CPLD) market with details of its first 0.35µm four layer metal device,...
View ArticlePower One AC-DC supply has 18W/in3 power density
Altera details 0.35µm CPLD Richard Wilson Altera continues to up the technology specifications in the complex programmable logic (CPLD) market with details of its first 0.35µm four layer metal device,...
View ArticleVicor adds I2C and ups current of ZVS regulators
Vicor recently added to its PI33xx Picor Cool-Power ZVS buck regulator product line for point of load DC-DC regulation. This product line extension includes higher current devices and optional I2C...
View ArticleMicrel PWM regulator has only 5mV output ripple
Micrel has a family of 4MHz pulse wave modulation (PWM) 6A/3A synchronous buck regulators, which are designed to produce just 5mV of output ripple in full PWM mode. The MIC23603/303 regulators combine...
View ArticleVicor has web tool for configuring VI Chip modules
Vicor’s VI Chip PRM modules have been given new user-configurability capabilities, and the PRM modules can be configured for use as point-of-load buck-boost regulators or to drive VTM current...
View ArticleClik here to view.
Ericsson offers digital control of high power modules
Ofgem has approved an industry code-of-practice designed to protect consumers during the smart meter roll-out. “With the roll-out of smart meters getting fully under way next year, it is essential...
View ArticleClik here to view.
Future electric vehicles will use GaN and SiC, says supplier
GaN Systems is presenting a paper on new wide-bandgap semiconductors and their role in automotive power electronics at the Electric & Hybrid Vehicle Conference & Expo in Michigan 17 – 19...
View ArticleUnipower auro-he modular front-ends and rectifiers
Unipower’s auro-he series of modular front-ends and rectifiers will produce up to 1500W from a 1U (1.6in) high enclosure. These are hot swappable, high efficiency (92%) units featuring a power density...
View ArticleLEM HO-series of open-loop current transducers
LEM has introduced the HO-series of open-loop current transducers based on Hall-effect current sensing technology that measures AC, DC or pulsed currents with a nominal value of 8, 15 or 25Arms, with a...
View ArticleVincotech power module for single-phase solar systems
Vincotech has added a family of power modules for transformer-based, single-phase solar inverter applications and switch-mode power supplies. The flowSOL 1 modules have been designed for use in...
View ArticleMartek 100W supply meets railway specs
Martek Power’s latest power supply designed for railway applications is the Powertron CPCIR series of DC-DC converters. Featuring 100W maximum output power, the CPCIR series is designed specifically to...
View ArticleCUI POL power module needs no bus
CUI has introduced a self-compensating no-bus digital point of load DC-DC converter module. The NSM2P has the same features and functions of a digital POL converter without the need for a serial bus...
View ArticleMurata launches medical power supplies
Murata has brought out 3″ x 5″ 250 W and 400 W AC-DC power supplies with medical approvals. The power supplies, designated MVAC, claim to have 94% efficiency and are suitable for use in a wide variety...
View Article
